Reer MOSAIC M1 Installation And Use Manual page 181

MODULAR SAFETY INTEGRATED CONTROLLER MOSAIC
Reading analysis: Enable threshold1 / threshold2
If you activate the options Enable threshold1 and/or Enable threshold2, the output
Out1 and/or Out2 are added to the graphical representation of the function block
and a number of additional parameters are displayed.
The following parameters are provided to define the behavior of the Threshold
comparator:
• Threshold1 / threshold2: is the value of the threshold.
• Hysteresis: is the hysteresis value
The following figure and table exemplify the states of the Enable threshold:
Measurement value (A)
(A) < Threshold value - hysteresis
(A) <= Threshold value
(A) > Threshold value
(A) < Threshold value - hysteresis
(A) < Threshold value - hysteresis
8540780 • 25/01/2023 • Rev.43
Figure 109 – Example of Enable threshold behavior
Current state of threshold
comparator
UNDER THRESHOLD
UNDER THRESHOLD
UNDER THRESHOLD
OVER THRESHOLD
OVER THRESHOLD
Next state of threshold
comparator
UNDER THRESHOLD
UNDER THRESHOLD
OVER THRESHOLD
OVER THRESHOLD
UNDER THRESHOLD
181