Wolf CSO24TE/S General Information Manual page 52

Cavity Component Removal and Installation
INSTALL THE RACK GUIDE (continued)
3 Install the rack guide nut.
Install the Rack
1 Insert the rack between the rails of the rack guide.
2 Push the rack into the oven.
HALOGEN LIGHT BULB REMOVAL
To remove the halogen light bulb, first remove the racks and the
left rack guide.
Remove the Rack
Pull the rack forward out of the unit.
Remove the Rack Guide
1 Remove the rack guide nut.
2 Pull the front of the rack guide toward the center of the
oven.
3 Pull the rack guide forward out of the unit.
Remove the Halogen Light Bulb
1 Use a T-20 Torx bit to remove the screws from the oven light
frame assembly.
2 Remove the oven light frame assembly.
3 Remove the oven light safety glass.
4 Remove the oven light seal if required.
827703 REV B.1
CSO (SWS #13543126)
5 Remove the halogen light bulb.
HALOGEN LIGHT BULB INSTALLATION
Install the Halogen Light Bulb
TIP: Use a cloth to install the halogen light bulb. Oil from
fingers shortens the life of the halogen light bulb.
1 Insert the halogen light bulb into the socket.
2 Install the oven light seal into the oven light frame assembly
if it was removed.
3 Place the oven light safety glass onto the oven light seal.
4 Place the oven light safety glass, oven light seal, and oven
light frame assembly over the light housing.
5 Use a T-20 Torx bit to install the screws into the oven light
housing.
Install the Rack Guide
1 Insert the rack guide rails into the rear baffle.
2 Place the indent in the rack guide over the rack guide stud.
3 Install the rack guide nut.
Install the Rack
1 Insert the rack between the rails of the rack guide.
2 Push the rack into the oven.
REAR BAFFLE REMOVAL
To remove the rear baffle, first remove the racks and rack
guides.
52
service.subzero.com