Wolf CSO24TE/S General Information Manual page 40

Settings
Descale the Appliance (continued)
Descale the Appliance
1
Touch Settings twice. The Settings
2 Touch the right arrow key to move to Descale Appliance.
3 Touch Enter. The Descale Now screen appears.
4 To start descaling the appliance, use the arrow keys to
underline Yes.
5 Touch Enter on the selection.
Set the Water Hardness
1
Touch Settings twice. The Settings
827703 REV B.1
menu appears.
menu appears.
40
CSO (SWS #13543126)
2 Touch the right arrow key to move to Set Water Hardness.
3 Touch Enter. The Water Hardness screen appears.
4 Use the arrow keys to underline the water hardness level:
• Use Water Hardness Soft (1-15°fH, 1-8°dH)
factory test strip reads less than 60 ppm (parts per
million).
• Use Water Hardness Medium (16-35°fH, 9-20°dH)
the factory test strip reads between 60 ppm and 120
ppm.
• Use Water Hardness Hard (36-50°fH, 21-28°dH)
the factory test strip reads greater than 120 ppm.
5 Touch Enter to confirm.
Set the Loudness
1
Touch Settings twice. The Settings
service.subzero.com
if the
if
if
menu appears.