Wolf CSO24TE/S General Information Manual page 49

Cavity Component Removal and Installation
Intermediate Door Glass Removal (continued)
INTERMEDIATE DOOR GLASS REMOVAL
To remove the intermediate door glass, first remove:
Door
1
Door front or inner door
2
Remove the Intermediate Door Glass
1 Use pliers to straighten the glass retainer tabs.
2 Remove the intermediate door glass from the inner door.
3 Remove the gasket if necessary.
INTERMEDIATE DOOR GLASS INSTALLATION
After installing the intermediate door glass, install:
Door front or inner door
1
Door
2
Install the Intermediate Door Glass
1 Install the gasket if removed.
2 Place the intermediate door glass on the inner door.
3 Use pliers to bend the glass retainer tabs over the
intermediate door glass.
DOOR HANDLE REMOVAL
To remove the door handle, first remove:
1 Door
2 Door front or inner door
Remove the Door Handle
1 Use a T-25 Torx bit to remove the handle mounting screws.
827703 REV B.1
CSO (SWS #13543126)
2 Remove the handle and handle standoffs from the door
front.
DOOR HANDLE INSTALLATION
After installing the door handle, install:
Door front or inner door
1
Door
2
Install the Door Handle
1 Place the door handle and handle standoffs onto the door
front.
2 Use a T-25 Torx bit to install the handle mounting screws.
RETRACTABLE DOOR HANDLE REMOVAL
To remove the retractable door handle, first remove:
1 Door
2 Door front or inner door
Intermediate door glass
3
Remove the Retractable Door Handle
1 Use a T-20 Torx bit to remove the handle assembly
mounting screws.
49
service.subzero.com