Quick Reference Table - Supermicro X13SET-PT User Manual

Super X13SET-PT User's Manual

Quick Reference Table

Jumper Description
JBT1 CMOS Clear
10 Gb LAN1/LAN2 AUX Power Enable/Disable
*Consult Supermicro before enabling this jumper. There must
JPAUX1
be sufficient airflow to enable JPAUX1 in standby mode (S5
state).
JPME2 ME Manufacturing Mode
JPTG1 10 Gb LAN1/LAN2 Enable/Disable
LED Description
HDD_LED1 HDD Activity LED
LED1, LED2 SFP+ Port LEDs
LEDM1 BMC Heartbeat LED
LEDPWR Power LED
M.2_1_LED1 M.2 LED for M.2-C1
M.2_2_LED1 M.2 LED for M.2-C2
UID-LED Unit Identifier (UID) LED
Connector Description
BMC_LAN Dedicated BMC LAN Port
BT1 Onboard CMOS Battery
COM1 Front Accessible COM Port Header
FAN3, FAN4 4-pin CPU Fan Headers
JHS1 Supermicro Proprietary Front Control Panel Header
JIPMB1 4-pin BMC External I
JNCSI1 NC-SI (Network Controller Sideband Interface) Connector
JSD1, JSD2 SATA DOM (Disk-On-Module) Power Connector
JTPM1 Trusted Platform Module/Port 80 Connector
JRK1 Intel VROC Key Header for NVMe RAID support
JUIDB1 Unit Identifier (UID) Switch / BMC Reset Button
LAN1, LAN2 10 Gb SFP+ Ports
M.2-C1, M.2-C2 M.2 M-Key 2280/22110 (supports PCIe 5.0 x4) Slot
SATA6, SATA7 Intel PCH Powered SATA 3.0 Ports with support for SuperDOM (Disk on Module) devices
PCIe 5.0 x8 Slot supported by CPU for Supermicro proprietary riser card and six SATA connections
SXB1
(SATA0–5) supported by PCH
SXB3 PCIe 5.0 x16 Slot supported by CPU for the Supermicro proprietary riser card
Note: The table is continued on the next page.
C Header
2
12
Default Setting
Open (Normal)
Pins 2-3 (Disabled)
Pins 1-2 (Normal)
Pins 1-2 (Enabled)
Status
Blinking Green: HDD Active
Blinking Green (Bottom): Activity
Solid Green (Top): 10 Gbps Link Speed
Solid Yellow (Top): 1 Gbps Link Speed
Blinking Green: BMC Normal (Active)
Solid Green: during BMC Reset or
during a Cold Reboot
LED On: Onboard Power On
Blinking Green: M.2 Active
Blinking Green: M.2 Active
Solid Blue: Unit Identified