KYOWA WGA-120A Instruction Manual page 8

Power supply
To prevent a fire hazard, ensure that the power supply voltage specified for the WGA-120A matches the
local line voltage before turning ON the power.
The power supply voltages are described in the following.
DC model:
100 VAC model:
200 VAC model:
240 VAC model:
Power cable and power outlet
The WGA-120A does not have POWER switch. Before connecting power cable to the WGA-120A,
make sure the distribution board does not supply power to the power cable. Or, electricity shock hazard
or damage of the product may result.
Protective ground
To prevent an electric shock hazards, be sure to connect the product to the ground before turning ON the
power.
When 2P parallel vinyl wire is used for power cable, always connect the GND terminal with a separate
ground wire.
△
！ WARNING
10.5 to 15 VDC, power dissipation 3.5 W or less
90 to 110 VAC, power dissipation 6.5 VA or less
180 to 220 VAC, power dissipation 6.5 VA or less
216 to 264 VAC, power dissipation 6.5 VA or less
-3-