KYOWA WGA-120A Instruction Manual page 61

Zero Adjustment Range
Sensitivity Adjustment Range
Calibration
Frequency Response
Nonlinearity
Signal-noise Ratio
Within ±1.5 mV/V, manual balance or auto balance by
selecting model.
×2000, ×4000, ×10000
(Switchable by changing internal jumper connection)
Adjustable between ×0.4 and ×1.0 by the trimmer.
Calibration by the parallel resistance method
0.25mV/V or 0.05mV/V at 350-ohm bridge resistance
(Switchable by changing internal jumper connection)
10, 30, 100, or 500 Hz (Switchable by changing internal jumper
connection)
Within ±0.1%FS
53 dB or more
p-p
[Conditions]
Sensitive: ×10000, ×0.5(Adjustment by the trimmer),
Frequency Response: 500 Hz, Bridge resistance: 120 ohm,
Bridge excitation voltage: 2 Vrms
-56-