Table of Contents
Advertisement
Confirmation of protective functions
To prevent electric shock hazards, when any trouble occurs in protective functions including the GND
terminal and a fuse, do not to operate the product. Furthermore, before operating the product, always
check whether error exists or not in protective functions.
Fuse
When the pilot lamp does not light up, the fuse may be blown.
When replacing the fuse with a new one, be sure to use a fuse providing the same rating (current, voltage,
type) as specified for the product. Do not use any fuse other than specified. Do not short-circuit the fuse
holder. Before replacing the fuse with a new one, disconnect the power cable.
Use the following fuse.
DC model
Resettable fuse (replacements are not required.)
100 VAC model
200 VAC model
240 VAC model
Fast acting, 100mA, 250 V, Diameter: 5 mm, Length: 20 mm
-4-
Advertisement
Chapters
Table of Contents
