To Connect Transducers; To Connect Transducers In Parallel - KYOWA WGA-120A Instruction Manual

3-3 TO CONNE CT TRANSDUCERS
Connect transduc cers as follows.
Transducer input
terminal
3-4 TO CONNE CT TRANSDUCERS IN
The WGA-120A connects up to 4 transduc
Transducers shou uld be the same model and
NOTE
To use a transducer, the input &
the exc citation voltage should be
N PARALLEL
ers (bridge resistance: 350
d same capacity. At this tim
output resistances (bridge
2 Vrms or 1 Vrms.
-32-
0 ohm) in parallel.
me, the bridge resistance is
e resistance) is less than 17
s 87.5 ohm.
75 ohm,