Fayat Group DYNAPAC CA25 Instruction Manual page 98

Fig. Fuel filter
Fig. Engine Compartment
1. Fuel strainer
2. Hose clamp
10-03-2022
Maintenance – Planned maintenance
Maintenance – 500/1500h
Park the roller on a level surface.
When checking and making adjustments, the
engine should be switched off and the
emergency/parking brake should be applied, if
not otherwise specified.
Ensure that there is good ventilation (air
extraction) if the engine is run indoors. Risk
of carbon monoxide poisoning.
Fuel filter and fuel prefilter replacement
Remove the threaded fuel filter using the filter wrench.
Lubricate the O ring with clean lubricating oil.
Do not prefill the engine fuel filter.
Install the filter on the filter head. Press the filter until the seal
touches the surface of the filter head. Press the fuel filter
another 3/4 of a revolution after contact.
The air needs to be removed from the fuel system after fuel
filter installation.
Check the procedure for removing the air in the engine
manual.
Fuel Strainer cleaning
Ensure good ventilation (air extraction) if the
diesel engine is run indoors. Risk of carbon
monoxide poisoning.
Loosen the hose clamp (2) and remove the strainer (1).
Clean the Strainer (1), taking care to fit in the direction of flow.
Discard the Strainer (1) in a safe manner, its of
expandable type and cannot be cleared.
Start the engine and check that the Strainer does not leak.
4812330982EN 98