Figure 124. Installing the BOSS riser
Next steps
1. If needed,
install the Expansion card riser
2. If needed,
install the Expansion card riser
3.
Install the 2U air shroud
4. Follow the procedure listed in
Removing the M.2 BOSS card from the M.2 BOSS riser
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3.
Remove the BOSS
riser.
Steps
Holding the blue tag, pull the M.2 BOSS card away from the M.2 BOSS riser.
152
Installing and removing system components
1.
2.
After working inside your
Safety
instructions.
Before working inside your
system.
system.