Removing The M.2 Boss Card From The M.2 Boss Riser - Dell EMC PowerEdge R450 D K 0 Series Installation And Service Manual

Figure 77. Installing the M.2 boss riser
Next steps
Follow the procedure listed in

Removing the M.2 BOSS card from the M.2 BOSS riser

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3. Removing the M.2 BOSS
About this task
Holding the blue tag, pull the M.2 BOSS card away from the M.2 BOSS riser.
After working inside your
Safety instructions.
Before working inside your
riser.
system.
system.
Installing and removing system components 77