Reboot; Figure 3-33: Carrier Setting; Figure 3-34: Reboot - Baicells Nova436Q Installation Manual
Outdoor 4x1w two-carrier tdd enodeb
Hide thumbs
Also See for Nova436Q:
- Installation manual (29 pages) ,
- Installation manual (28 pages) ,
- Installation manual (39 pages)
Table of Contents
Advertisement
Nova436Q Outdoor 4x1W Two-Carrier TDD eNodeB Installation Guide
Figure 3-33: Carrier Setting
3.8.8 Reboot
Once the basic configuration settings are saved, reboot the eNB. There are two options for rebooting in
the eNB GUI. From the landing page of the eNB GUI, navigate to System > Reboot, or select Reboot under
the Welcome banner (Figure 3-34 ).
Figure 3-34: Reboot
42
Advertisement
Table of Contents
