9. Pole installation:
a. Low-Gain CPE:
a1)
Attach a heavy-duty anti-slip rubber band on the pole (Figure 14).
Figure 14: Rubber Band
a2)
Fix the CPE bracket over the band using the hoop (Figure 15).
Figure 15: Bracket
a3)
Attach the CPE to the bracket and tighten the screw (Figure 16).
Figure 16: Attach CPE
a4)
b. High-Gain CPE:
b1)
Tighten the four M6 screws on the bottom of the bracket (Figure 17).
Figure 17: Tighten Screws
The CPE is now ready for installation at its final outside location. Proceed to
section
7.
17