Figure 3-6: Attach Enb To Bracket; Figure 3-7: Tighten Screw; Figure 3-8: Completed Installation - Baicells Nova436Q Installation Manual

Nova436Q Outdoor 4x1W Two-Carrier TDD eNodeB Installation Guide
3. Align the two pins on the eNB bracket to the pin holes on the pole bracket, and lower the pins
vertically into the pin holes ensuring the hooks on the eNB are firmly attached in the slot on the
pole bracket (Figure 3-6).

Figure 3-6: Attach eNB to Bracket

4. Tighten the screw on the top of the bracket using a Phillips-head screwdriver (Figure 3-7) to
complete the installation (Figure 3-8).

Figure 3-7: Tighten Screw

Figure 3-8: Completed Installation

5. Proceed to section 3.4.
19