Figure 3-5: Attach Enb To Bracket; Figure 3-6: Completed Installation - Baicells Nova430i Installation Manual

Nova430i Outdoor 4x250mW Two-Carrier TDD eNodeB Installation Guide
2. Using the bracket on the back of the eNB, hang the eNB on the pole bracket, ensuring that the
hook on the eNB bracket is firmly attached in the slot on the pole bracket (Figure 3-5).

Figure 3-5: Attach eNB to Bracket

3. Tighten the screw on the top of the bracket using a Phillips-head screwdriver to complete the
installation (Figure 3-6).

Figure 3-6: Completed Installation

4. After installation is complete, adjust the eNB to a proper angle by
5. Proceed to section 0.
tilting.
16