Assemble The Feed Cone And Center Support; Assemble The Center Support And Feed Cone To Grill - Chore-Time LIBERTY Feeding System Installation And Operator's Manual

LIBERTY® Feeding System with Electronic Sensor (ES)

Assemble the Feed Cone and Center Support

Slide the feed cone down over the top of the support
cone. be sure to align the guides on the support cone.
Pass the cords up the channel on the support cone. be
sure to run the cord under the retainer as shown.See
Figure 20.
Run the end of the cord up through the guides on the top
of the support cone. Tie cords together to hold the cords
in place.
Assemble the Center Support and
Feed Cone to grill.
2.Guide the cone assembly through the grill cap, be
sure the cords pass through the cap. See Figure 21
3.Align the threads and rotate the grill to the cone
assembly. See Figure 22. While hold the pan
SHIELD cap use a piece of tube to rotate the feed
cone to position #4 FOR TURKEY AND #2 FOR
BROILERS.
Run cord behind guide and
under the hold down.
4.Rotate the support cone while holding the pan shield (DO NOT USE THE BOTTOM OF THE GRILL TO
HOLD WHILE ROTATING) FOR TURKEYS SET TO #4 FOR BROILERS SET TO #2
BROILER
MF2426B
Figure 21.Assembling Support Cone to grill
TURKEY
Figure 22.Feeder Cone Strut (side view)
Installing the Suspension System
Figure 20. Assembling lift Cords to Feed Cone
SHIELD
Shield
15