YASKAWA CIMR-F7Z44P0 User Manual page 71

Parameter Parameter Name
No. Digital Operator Display
Input Voltage Setting
E1-01
Input Voltage
Ensure the DATA/ENTER key is pressed to enter the selection in the Drive. "Entry Accepted" briefly appears and
the display is now no longer flashing.
9. Press the key once to display E2-01 "Motor Rated FLA".
This parameter is the foundation of motor protection. It can be entered when auto-tuning is performed. Set this
parameter according to the motor rated current (FLA). Press the DATA/ENTER key once. Use the
to adjust E2-01 to the motor rated full load amps.
Parameter
No. Digital Operator Display
Motor Rated Current
E2-01
Ensure the DATA/ENTER key is pressed to enter the value in the Drive. "Entry Accepted" briefly appears and your
display is now flashing.
10. Press the ESC once. Press DATA/ENTER once. Press
selects where the Drive will receive the run command. Press the DATA/ENTER key once. Use the
the DATA/ENTER key to set this parameter for the application.
Parameter Parameter Name
No. Digital Operator Display
Run Command Selection
b1-02
Run Source
Ensure the DATA/ENTER key is pressed to enter the selection in the Drive. "Entry Accepted" briefly appears and
the display is now not flashing.
11. Press the ▼ key once to display b1-01 "Reference Source". This parameter selects where the Drive will receive the
speed command. Press the DATA/ENTER key once. Use the
parameter for the application.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Table 4.2 Input Voltage Setting
Setting Range
Table 4.3 Motor Rated Current
Parameter Name
Motor Rated FLA
Table 4.4 Run Command Selection
Setting Choices
0: Operator
1: Terminals
2: Serial Com
3: Option PCB
Start Up 4 - 6
Factory Setting
155.0 to 255.0
(208-240Vac) (208-240Vac)
310.0 to 510.0
(480Vac) (480Vac)
Setting Factory
Range Setting
kVA kVA
Dependent Dependent
key twice to display b1-02 "Run Source". This parameter
Setting
Range
0 - 3
or ▼ keys and the DATA/ENTER key to set this
Menu Location
240.0
Quick Setting
or
480.0
Programming
,▼, and
Menu
Location
Quick Setting
or
Programming
or ▼ keys and
Factory
Menu Location
Setting
Quick Setting
1 or
Programming
keys