Table of Contents
Advertisement
Error Check
Errors are detected during communication using CRC-16. Perform calculations using the following method:
1.
The factory setting for CRC-16 communication is typically zero, but when using the Modbus system, set the factory set-
ting to one (e.g., set all 16 bits to 1).
2.
Calculate CRC-16 using MSB as slave address LSB, and LSB as the MSB of the final data.
3.
Calculate CRC-16 for response messages from the slaves and compare them to the CRC-16 in the response messages.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Communications D - 6
Advertisement
Table of Contents
