YASKAWA CIMR-F7Z44P0 User Manual page 15

Drive Model Numbers
The model number on the nameplate indicates the design specification, voltage, and rating of the Drive in alphanumeric codes.
Drive Enclosure and Revision Code
The Drive SPEC number on the nameplate indicates the voltage, Drive rating, enclosure type, and the revision code of the
Drive in alphanumeric codes.
No.
2
4
Open Chassis Type (IEC IP00)
Protected so that parts of the human body cannot reach electrically charged parts from the front when the
Drive is mounted in a control panel, also called (protected chassis).
NEMA Type 1 (IEC IP20)
TERMS
The Drive is shielded from the exterior, and can thus be mounted to the interior wall of a building
(not necessarily enclosed in a control panel). The protective structure conforms to the standards of NEMA
Type 1 in the USA. All protective covers (Fig 1.4) must be installed to conform with IEC IP20 and NEMA Type
1 requirements.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
CIMR – E7 U 2 0 11
AC Drive
E7 Family
No. Spec
U
UL Specification
No. Voltage
2
3-phase, 208-240Vac
4
3-phase, 480Vac
Fig 1.2 Drive Model Number Structure
2 011 1 A
Voltage
3-phase, 208 - 240Vac
3-phase, 480Vac
Rating
Fig 1.3 SPEC Number Structure
Physical Installation 1 - 4
Rating
Hardware Revision
Enclosure Type
No.
0 Open chassis (IEC IP00)
1
NEMA Type 1 (IEC IP20)