Table of Contents
Advertisement
Modified Constants Menu (-VERIFY-)
This menu is used to set/read the parameters that have been modified from their original factory default settings. Follow the
key operations below (Fig 3.8) to access the Modified Constants Parameter Menu.
x4
Note 1: If there are not any parameters that have been modified from their original factory default settings, then the display
will state "None Modified". Otherwise, use the "increase" and "decrease" keys to scroll through the "Modified
Constants" list.
Auto-Tuning Menu (-A.TUNE-)
This menu is used to auto-tune the Drive in order to optimize motor performance as well as utilize the bi-directional speed
search feature. Follow the key operations below (Fig 3.9) to access the Auto-Tuning Menu.
x5
Use
and
keys to scroll through the "Auto-Tuning" parameter list.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
-VERIFY-
** Main Menu **
- - - - - - - - - - - - - -
Modified Consts
Fig 3.8 Modified Constants Menu Access Procedure
-A.TUNE-
** Main Menu **
- - - - - - - - - - - - - -
Auto-Tuning
Fig 3.9 Auto-Tuning Menu Access Procedure
Table 3.13 Auto-Tuning
Parameter List
Auto-Tuning Parameters
T1-02
Mtr Rated Power
T1-04
Rated Current
Digital Operator 3 - 14
See Note 1
See Note 1
-A.TUNE-
Mtr Rated Power
- - - - - - - - - - - - - - - - - - - -
T1-02=
0.40kW
(0.00~650.00)
"0.40kW"
Advertisement
Table of Contents
