Table of Contents
Advertisement
Installation and mounting
5.6 Connecting the dispenser
5.6.5
Connecting the communication cable
The dispenser requires an Ethernet connection to the charging station for communication
and for remote access from the backend systems. The connection point in the charging
station is described in the circuit diagram and the operating instructions of the charging
station.
Connecting the Ethernet cable
For a connection between the dispenser (-XD210) and the charging station, use the port
(-FA201) for the Ethernet cable connection.
Secure the cable with a strain relief.
①
Figure 5-14 Connection point of the Ethernet cable
56
Connection point of Ethernet cable
Operating Instructions, 10/2023, A5E52758387-AB
Dispenser
Advertisement
Table of Contents
