Basic Information; Open-Source Software - Siemens SICHARGE D Dispenser Operating Instructions Manual

Introduction

1.3 Open-source software

1.2

Basic information

The dispenser meets all required technical safety standards and therefore provides the
greatest possible product safety. To ensure the safety of all persons, systems and equipment
at all times, adhere to the following basic safety instructions.
Charging station with dispenser
The dispenser is always operated together with the charging station. This manual describes
the dispenser and its connection with the SICHARGE D charging station.
Guidelines and regulations
In order to ensure comprehensive safety, adhere to the following guidelines and regulations:
• Guidelines for occupational safety
• Regulations for prevention of accidents
• Trade regulations
• Technical connection conditions of the power supply unit
• Building regulations
• Generally accepted rules of technology
Target group
These operating instructions are intended for the following persons:
• Operators
• Qualified electricians
• Assemblers
• Planners
• Service personnel
• Carriers
1.3 Open-source software
Open-source software is used in the firmware of the product described. Open Source
Software is provided free of charge. We are liable for the product described, including the
open-source software contained in it, pursuant to the conditions applicable to the product.
Siemens accepts no liability for the use of the open source software over and above the
intended program sequence, or for any faults caused by modifications to the software.
For legal reasons, we are obliged to publish the original text of the license conditions and
copyright notices. Please also read the information that is available for download on the
Siemens homepage (https://support.industry.siemens.com/cs/de/de/view/109796318/en).
The license agreements are listed and can be read in the Help menu of the SICHARGE D.
8
Operating Instructions, 10/2023, A5E52758387-AB
Dispenser