Stopping The Charging Process - Siemens SICHARGE D Dispenser Operating Instructions Manual

Operation

7.4 Stopping the charging process

If, for example, you need to authenticate yourself with an RFID card, scanning the card brings
you immediately to the charging screen.
7.4 Stopping the charging process
Automatic stopping
The following scenarios result in automatic termination of the charging process:
• Vehicle ends charging process regularly
• Vehicle detects a fault
• Charging station detects an internal critical error
• Emergency Stop is triggered by the following:
– Actuation of the Emergency Stop switch
– Opening the device doors
– Interruption of the external safety loop
– External load management system
Manual stopping
To stop the charging process manually, you must be logged in. Switch to the detail view of
your charging process. You can end the charging process by pressing the "Stop charging"
button on the bottom right. You will be asked if you want to end the charging process.
Confirm by tapping the button on the bottom right again. Following this, the summary of the
charging process appears.
Figure 7-5 Stopping the charging process
66
Operating Instructions, 10/2023, A5E52758387-AB
Dispenser