Table of Contents
Advertisement
4.4
Air transport
Description of packaging
If the dispenser is transported by air, the dispenser is placed on a reinforced and insulated
wood pallet. Film protects the dispenser against dirt particles and moisture.
The packaging consists of the following elements:
• Export packaging in accordance with IPPC standard (ISPM15)
• Reusable carton with bayonet closure
• Base plate
• Pallet base
• PE cover
• Strapping for securing load
• Box of accessories attached to the side of the packaged charging station
NOTE
Packaging for air transport cannot be stacked.
Figure 4-4 Packaging for air transport
Dispenser
Operating Instructions, 10/2023, A5E52758387-AB
Transport and storage
4.4 Air transport
33
Advertisement
Table of Contents
