Table of Contents
Advertisement
5.5.1
Preparing cables
Prepare all the necessary conductors and connections before you start positioning the
dispenser on the foundation.
Cable routing
Route the cables for the auxiliary power supply and communication separately and protected
from the power cables. Maintain a minimum clearance of 25 cm to avoid electromagnetic
interference. Avoid routing the cables parallel to the electric power cables in the dispenser.
Route the cables in the dispenser orthogonal to the electric power cables. Observe the
country-specific regulations.
Auxiliary power supply
You must prepare the individual conductors of the cable in order to connect them properly.
Proceed as follows:
Observe the five safety rules according to DIN EN 50110-1:2013
Working on live parts can result in severe injuries and death. Only work on the electrical
equipment when it is in a de-energized state.
1. Shorten the cable for the auxiliary power supply to 60 cm, measured from the upper edge
of the foundation. Take into account the position of the cable entry on the bottom of the
dispenser.
2. Remove the sheath of the cable.
3. Protect the individual conductors properly from environmental influences such as dirt and
moisture.
Communication cable
Connect the dispenser to the charging station via an Ethernet cable. Ensure proper protection
of the communication cable from environmental effects such as dirt and moisture. Observe
the notes on routing from section 5.3 "Base area" (Page 41).
DC cables
To connect the DC cables from the charging station to the dispenser, follow these steps:
1. Shorten the cables to 2.2 m, measured from the upper edge of the foundation. Observe
the exact position of the cable entry for the DC cables on the bottom of the dispenser.
2. Remove the sheath of the DC cables.
3. Protect the individual conductors properly from environmental influences such as dirt and
moisture.
Dispenser
Operating Instructions, 10/2023, A5E52758387-AB
WARNING
Installation and mounting
5.5 Installing the dispenser
45
Advertisement
Table of Contents
