Oneida Air Systems XXVM001500 Owner's Manual page 7

system start-up Information (Continued)
d. Check wood stock for old nails and screws which can create red-hot metal fragments.
14. DO NOT overload woodworking equipment, especially sanders, as excessive frictional heat can spontaneously ignite dust.
Sanders can produce concentrations of dust well into the combustible range.
15. ALWAYS check that all dust collection equipment is properly selected and sized for the intended use. Authorities with
jurisdiction should be consulted before installing to verify local codes and installation procedures. In the absence of such
codes, install collector according to the National Electric Code, NFPA No. 70-latest edition and NFPA 91, NFPA664 Code
(NFPA 654 if combustible dust is present).
Customer service Dept.
1-866-387-8822 • support@oneida-air.com
oneida-air.com 5