Oneida Air Systems XXVM001500 Owner's Manual page 24

assembly Instructions (Continued)
Attach the Fine Dust Bin (I4) to the Filter (H)
14
with four J-Bolts (I5A) and four Thumb Nuts
(I5B) as in [FIG. 14].
FIG. 14
To ground the filter, attach the ring terminal
15
on the braided ground wire from the Motor
Assembly (A) to a bolt on the filter plate,
under the nut, then attach the alligator clip to
the filter's cage [FIG. 15].
Note: If you need to extend the wire, you can
use any 16 gauge copper stranded wire and
connect with wire nuts
FIG. 15
22 Oneida Air Systems