Oneida Air Systems XXVM001500 Owner's Manual page 21

assembly Instructions (Continued)
Secure Filter Plate (I2), gasket side up, to Filter
8
Plenum Elbow (I1) with nine Bolts (I5C), nine
Flat Washers (I5D), and nine Whiz-Lock Nuts
(I5E). [FIG. 8a]
Note: Ensure holes on the Filter Plate line
up with those on the Plenum Elbow. The
hole pattern is asymmetrical. [FIG. 8b] The
rectangular shaft on the Bolt (I5C) must push
through the holes on the Filter Plate (I2).
Secure the Filter Plenum Elbow (I1) to the
9
outlet on the Fan Housing (B) using six Flange
Bolts (G4D) and six Whiz-Lock Nuts (G4E)
[FIG. 9a]. Leave lower outer corner empty for
Step 10 [FIG. 9b].
Support
Hanger
Ringlet
FIG. 8a
FIG. 9b
FIG. 8b
FIG. 9a
oneida-air.com 19