Oneida Air Systems XXVM001500 Owner's Manual page 19

assembly Instructions (Continued)
Once your cone is aligned with the supplied
5
support, lift the Barrel (C) onto the Cone (D),
making sure to align the corresponding flange
holes.
v [FIG. 5]
Note: Loosely tighten only at this time. Once
your Fan Housing is installed in the preferred
orientation you will need to remove one bolt to
install the Support Brace (G3) shown in Step 11.
DO NOT OVERTIGHTEN.
The proprietary resin of the V-System may flex
when hardware is tightened together. This will
not affect the system's performance.
Lift the Fan Housing (B) onto the Barrel (C),
6
making sure it is oriented so that the molded
"UP" text is visible. Align the housing's holes
with the holes in the barrel and keep in mind
the direction you want your outlet to face.
[FIG 6].
Secure the Fan Housing onto the Barrel using
eight Flange Bolts (G4D).
FIG. 5
FIG. 6
oneida-air.com 17