Scan Mode; Motion Aiming Control - Datalogic PowerScan Retail PD953X-RT Quick Reference Manual

Operating Modes

Scan Mode

 
Scan Mode = Trigger Single
Scan Mode = Trigger Hold
Scan Mode = Always On

Motion Aiming Control

This feature configures the ability of the scanner to
Enable/Disable the Aiming system when motion is
detected (Motionix™ motion-sensing technology). Scan
the Enter/Exit Programming bar code above, then either
of the barcodes below.
 
Motion Aiming Control =
18
ENTER/EXIT PROGRAMMING MODE
Multiple
Enable
Scan Mode = Trigger Pulse
Multiple
Scan Mode = Flashing
Scan Mode = Stand Mode
Motion Aiming Control =
Disable
PowerScan™ Retail PD953X-RT