Omron C200HE-CPU42-E Instruction Manual page 117

Standard Models
Name
B7A Interface Units
Note 1. If the Interrupt Input Unit is mounted on an Expansion I/O Rack, the interrupt function cannot be used
and the Interrupt Input Unit will be treated as an ordinary 8-point Input Unit. Moreover, Interrupt Input
Units cannot be used on Slave Racks. In addition, Interrupt Input Units require that a version 2 (i.e., mod-
el numbers with a "-V2" suffix) Backplane be used at the CPU Rack. If an earlier version Backplane is
mounted, the interrupt function cannot be used. When mounting the C200H-OC225, C200H-OD212, or
C200H-B7AO1 to a Backplane, make sure that the model number of the Backplane includes the suffix
"-V1" or "-Vj." The C200H-OC225, C200H-OD212, or C200H-B7AO1 cannot be mounted to any Back-
plane the model number of which does not include the suffix "-V1" or "-Vj."
2. The C200H-OC225 can overheat if more than 8 outputs are turned ON simultaneously.
Group-2 I/O Units
Name
DC Input Units
Transistor Output
Units Units
B7A Interface Units
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Specifications
15 or 16 Connects to B7A Link Terminals. Standard
input pts transmission delay.
16 Connects to B7A Link Terminals. Standard
output transmission delay.
pts
Specifications
64 pts 12 VDC
32 pts 24 VDC
64 pts
32 pts
64 pts
32 pts 16 mA at 4.5 V to 100 mA at 26.4 V
32 pts
32 pts 0.5 A (5 A/Unit) at 24 VDC
32 input Connects to B7A Link Terminals.
pts Standard or high-speed transmission S a da d o
delay.
32 output pts
16 input and
16 output
points
32 input and
32 output
points
Model number
C200H-B7AI1
C200H-B7AO1 (see
note)
C200H-ID111
C200H-ID216
C200H-ID217
C200H-ID218
C200H-ID219
C200H-OD218
C200H-OD219
C200H-OD21B
C200H-B7A12
g speed a s ss o
C200H-B7A02
C200H-B7A21
C200H-B7A22
Appendix A
Model number
101