Installation Environment
DIN Track Mounting Bracket
DIN Track
Procedure
1, 2, 3...
DIN Track Mounting
Bracket
56
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The DIN Track Mounting Bracket shown below is necessary for mounting the PC
to the DIN Track.
The following DIN Tracks are available.
Model
PFP-50N
50 cm long, 7.3 mm high
PFP-100N
1 m long, 7.3 mm high
PFP-100N2
1 m long, 16 mm high
1. The following diagram is a view of the back of the Backplane. Attach one
Mounting Bracket to the left and right sides of the Backplane as shown
below.
There are two Backplane mounting screws each on the left
and right sides of the Backplane. Use these screws to attach
the DIN Track Mounting Brackets to the Backplane.
Specification
Backplane
Section 3-1