Omron C200HE-CPU42-E Instruction Manual page 108

Inspection and Maintenance
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
3. While pushing down the lock lever on the Backplane with a screwdriver as
shown below, remove the Output Unit.
4. Using a Phillips screwdriver, remove the screw from the top of the Unit.
5. Using a flat-blade screwdriver, detach the case from the Unit.
6. Pull out the printed circuit board. The Relays are placed on the PC boards of
individual Units as shown in the figures below.
7. A Relay puller is provided inside the rear of the case when the Unit is deliv-
ered. Use the Relay puller to pull out the Relay as shown below. Insert a new
Relay.
Relays for the C200H-OC222V/OC224V/OC226V can be replaced without
using the Relay puller.
8. Reassemble in reverse order of assembly.
Lock lever
(4)
(5)
Using the Relay puller,
pull the Relay up and out
of the socket.
Printed circuit board
Section 5-2
Relay puller
91