Omron C200HE-CPU42-E Instruction Manual page 74

Installation Environment
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
2. Mount the Backplane to the DIN Track so that the claws on the Mounting
Brackets fit into the upper portion of the DIN Track as shown below.
Backplane
3. Loosen the screws attaching the Mounting Brackets to the Backplane. Slide
the Backplane upward as shown below so that the Mounting Bracket and
Backplane clamp securely onto the DIN Track. Tighten the screws.
Hold-down bracket
This claw fits into the DIN Track
DIN Track Mounting Bracket
DIN Track Mounting Bracket
DIN Track
Projec- Slide this screw to the top of the
tions projection and then tighten it.
Section 3-1
DIN Track
57