Omron C200HE-CPU42-E Instruction Manual page 127

Standard Models
Note: Use a proper Head Unit model for the optical module to be used. If two types of optical modules (unit type
and board type) are used, order an Optical Power Tester plus a proper Head Unit model.
Master Fiber Set
Name
Master Fiber Sets (1 m)
Note: 1. The Master Fiber Set is used in combination with the Optical Power Tester to check the optical levels of
optical fiber cables connected to optical fiber cable connectors.
2. Optical fiber cables must be prepared and connected by specialists.
3. The Optical Power Tester, Head Unit, Master Fiber set, and Optical Fiber Assembling Tool are required to
connect optical fiber cables.
Programming Devices
Name
Programming Consoles
Programming Console
Mounting Bracket
Programming Console
Connecting Cables
Data Setting Console
Data Setting Console
Connecting Cables Connecting Cables
Connecting Cable
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Specifications
S3200-CAT3202 (SYSMAC NET, NSB, NSU,
Bridge)
S3200-CAT2002/CAT2702 (SYSMAC NET, SYS-
MAC LINK)
S3200-CAT2822 (SYSMAC BUS)
Specifications
Hand-Held, w/backlight
2-m Connecting Cable included
Used to attach Hand-held Programming Console to a
panel.
For Hand-held Programming Con-
sole
Used for data input and process value display for the
C200H-TCjjj, C200H-TVjjj, C200H-CP114,
and C200H-PID0j.
For C200H-DSC01
Used to connect an IBM PC/AT or
compatible to the C200HX/HG/HE.
Model number
S3200-CAT3201
S3200-CAT2001H
S3200-CAT2821
Model number
C200H-PR027-E
CQM1-PRO01-E
C200H-ATT01
2 m C200H-CN222
4 m C200H-CN422
C200H-DSC01
2 m C200H-CN225
4 m C200H-CN425
3.3 m CQM1-CIF02
Appendix A
Stan-
dards
---
Stan-
dards
U, C
U, C
---
---
---
---
111