Cx-Programmer - Omron C200HE-CPU42-E Instruction Manual

Peripheral Devices

2-3-2 CX-Programmer

Connecting Cables for C200HX/HG/HE(-Z) PCs
Unit Unit port
CPU Unit
Built-in
peripheral
port
Built-in
RS-232C
port
D-Sub,
9-pin, female p ,
Host Link RS-232C
Unit (See port,
note.) D-Sub,
(C200H- 25-pin
LK201-V1 or female
C120-LK201-
V1)
Communica- RS-232C
tions Board port,
D-Sub, 9-pin
female
32
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The CX-Programmer is a Programming Device that runs on Windows. It is used
for full-scale programming operations. Use the following Connecting Cables to
connect the computer running the CX-Programmer with the C200HX/HG/
HE(-Z) PCs.
Computer Computer
port
IBM PT/AT D-Sub, 9-pin
or male
compatible
IBM PT/AT D-Sub, 9-pin
or male
compatible
IBM PT/AT D-Sub, 9-pin
or male
compatible
IBM PT/AT D-Sub, 9-pin
or male
compatible
Note The Host Link Units cannot be used to connect the CX-Programmer to a Z-type
PC (i.e., one with a -Z suffix on the model number).
Network Model
type
Peripheral CQM1-CIF02
bus or
SYSWAY
SYSWAY XW2Z-200S-
CV/500S-CV
XW2Z-200S-V/
500S-V
SYSWAY XW2Z-200P-V/
500P-V
SYSWAY
XW2Z-200S-
CV/500S-CV
XW2Z-200S-V/
500S-V
Section 2-3
Length Remarks
3.3 m ---
2 m/5 m ESD (elec-
trostatic dis-
charge)
countermea-
sures
2 m/5 m ---
2 m/5 m ---
2 m/5 m ESD (elec-
trostatic dis-
charge)
countermea-
sures
2 m/5 m ---