Lubricating The Machine 52Xi_188_294 Mm - Dürkopp Adler 52Xi Service Instructions Manual

Maintenance

12.2.2 Lubricating the machine 52Xi_188_294 mm

Pic. 55: Lubricating the machíne 52Xi_188_294 mm
(1) - Filling hole
(2) - Hook Support
Proper setting
The oil level must not fall below the inspection hole (3).
1. Tilt the machine onto the support pin.
2. Unscrew the screw from the filling hole (1).
3. Unscrew the screw from the inspection hole (3).
4. Pour the oil through the filling hole (1).
 The level is correct as soon as the oil starts to flow out through the
5. Tighten the screw in the inspection hole (3).
6. Tighten the screw in the filling hole (1).
7. Erect the machine head.
Service Instructions 52Xi, 52Xi-75 - 03.0 - 09/2023
P
inspection hole (3).
P
D
①
②
③
Oil level during
tilting machine
(3) - Inspection hole
D
71