Dürkopp Adler 52Xi Service Instructions Manual page 61

Puller
1. Unscrew the screw (1) with the washer (2).
2. Remove the lever (3)
3. Dismantle the nut (4).
4. Fix the shaft (6) at the other end with a screwdriver.
5. Replace the feeding wheels (5).
6. Mount and tighten the nut (4).
7. Fit the lever (3).
8. Screw in the screw (1) with the washer (2).
Pic. 47: Feeding wheels
Service Instructions 52Xi, 52Xi-75 - 03.0 - 09/2023
Beware of the left-handed threading!
①
Pos. Order number
0933 005725
1
0933 005737 A Rubber-coated feeding wheel - width 15 mm
2
0933 005738 A Toothed feeding wheel/44 teeth - width 15 mm
3
0933 005737
4
0933 005736
5
② ③
Description
Rubber-coated feeding wheel - width 9 mm
Toothed feeding wheel/88 teeth - width 15 mm
Toothed feeding wheel/88 teeth - width 9 mm
⑤
④
59