Trimming Cam - Dürkopp Adler 52Xi Service Instructions Manual

9.3 Trimming cam

Proper setting
If the trimmer is not active, then the shortest distance between the cam (1)
and roller (3) should be (A) = 0,2 mm.
Pic. 38: Trimming cam
(1) - Cam
(2) - Ring
1. Tilt the machine ( p. 12).
2. Locking the machine in place ( p. 17).
3. Loosen the 2 ring screws (2).
4. Loosen the 2 cam screws (1).
5. Shift the cam (1) to the roller (3) to the distance (A) = 0,2 mm from
6. Tighten the 2 ring screws (2).
7. Turn the cam (1) by slot (4) to the roller (3).
8. Tighten the 2 cam screws (1).
50
② ③
①
the straight face of the cam (1).
A
(3) - Roller
(4) - lot
Service Instructions 52Xi, 52Xi-75 - 03.0 - 09/2023
Thread trimming
④ ③
①