Table of Contents
Advertisement
Puller
10 Puller
Proper setting
The puller (3) swill automatically lift at the presser foot lifting and backtack-
ing. The function must be entered on the control panel, see Operating In-
structions, chapter 4.14.2.
The maximum length of the upper puller intermittent feeding is 7 mm. The
feeding length is to be set by the setting wheel (1) independent of the bot-
tom feeding.
The hand lever (2) lifts/lowers the puller.
The press button (4) activates the mode to lift the puller automatically (the
function will be set on the control panel).
Pic. 39: Puller
(1) - Setting wheel
(2) - Hand lever
Service Instructions 52Xi, 52Xi-75 - 03.0 - 09/2023
WARNING
Risk of injury!
Switch off the machine before the Puller setting.
①
②
③
④
(3) - Puller
(4) - Press button
51
Advertisement
Table of Contents
