Zigzag Stitch Width - Dürkopp Adler 52Xi Service Instructions Manual

4.4 Zigzag stitch width

Proper setting
The zigzag stitch width setting must be limited to the value prescribed for
the applied sewing equipment with the setting tolerance -5% of the pre-
scribed value.
Pic. 13: Zigzag stitch width
(1) - Lever
1. Set the zero stitch length on the knob.
2. Place a piece of paper onto the throat plate.
3. Dismantle the cover.
4. Loosen the screw (2).
5. Try to set the lever (1) in the position corresponding with the required
6. Turn the hand wheel there and back until the needle makes 2 holes in
7. Change the lever position (1) until the distance of the holes complies
8. Shift the screw (2) to the stop and tighten it.
22
Zigzag stitch mechanism of machines 523, 524, 527
zigzag stitch width.
the paper. Measure their distance.
with the proper setting.
(2) - Screw
Service Instructions 52Xi, 52Xi-75 - 03.0 - 09/2023
①
②