Lubricating The Machine 52Xi_188_294 Mm - Dürkopp Adler 52 i-75 Series Operating Instructions Manual

Maintenance
Operating Instructions 52Xi, 52Xi-75 - 03.0 - 09/2023
5.2.2

Lubricating the machine 52Xi_188_294 mm

Pic. 24: Lubricating the machine 52Xi_188_294 mm
P
(1) - Filllingn hole
(2) - Hook Support
Important
The oil level must not fall below the inspection (3).
1. Tilt the machine onto the support pin.
2. Unscrew the screw from the filling hole (1).
3. Unscrew the screw from the inspection hole (3).
4. Pour the oil through the filling hole (1).
 The level is correct as soon as the oil starts to flow out
through the inspection hole (3).
5. Tighten the screw in the inspectin hole (3).
6. Tighten the screw in the inspectoin hole (1).
7. Erect the machine head.
①
②
③
(3) - Inspection hole
P
D
D
Oil level during
titling machine
69