Dürkopp Adler 52Xi Service Instructions Manual page 31

Form stitch mechanism of machine 525
4. Set the tooth clearance as small as possible on the entire circumference
5. Tighten 4 screws (4) on the conical worm (1).
6. Move the regulating ring (2) on touch with the conical worm (1).
7. Tighten 2 screws (3).
8. Check the toot clearance.
Service Instructions 52Xi, 52Xi-75 - 03.0 - 09/2023
of the conical worm (1).
• Shift the conical worm (1) to the thread lever mechanism:
Reduce the tooth clearance
• Conical worm (1) shifting to the hand wheel:
Increase the tooth clearance
29