Zero Stitch Length - Dürkopp Adler 52Xi Service Instructions Manual

Feeding and presser foot

6.2 Zero stitch length

Proper setting
If the zero stitch length is set, the connecting rod (3) should perform no
motion.
Pic. 22: Zero stitch length
(1) - Sleeve
(2) - Screw
1. Set the stitch length knob on the zero cipher.
2. Tilt the machine ( p. 12).
3. Loosen the screw (2).
4. Shift the sleeve (1) until the position is found where the connecting
5. Tighten the screw (2).
Service Instructions 52Xi, 52Xi-75 - 03.0 - 09/2023
rod (3) stops moving.
(3) - Connecting rod
①
②
③
33