Table of Contents
Advertisement
12.1 Cleaning
Sewing dust and thread residues should be removed after every 8 operat-
ing hours using a compressed air gun or a brush. If very fluffy sewing
material is being sewn the machine must be cleaned more frequently.
66
WARNING
Risk of injury from flying particles!
Flying particles can enter the eyes, causing injury.
Wear safety goggles.
Hold the compressed air gun so that the particles
do not fly close to people.
Make sure no particles fly into the oil pan.
NOTICE
Property damage from soiling!
Sawing dust and thread residues can impair the operation of
the machine.
Clean the machine as described.
NOTICE
Property damage from solvent-based cleaners!
Solvent-based cleaners will damage paintwork.
Use only solvent-free substances for cleaning.
Service Instructions 52Xi, 52Xi-75 - 03.0 - 09/2023
Maintenance
Advertisement
Table of Contents
