Table of Contents
Advertisement
Operating Manual
MHM-97442
Enter/edit parameters
Editing of configuration parameters is made in the computer's working memory. This
applies even if a monitor is connected to the computer and if this monitor is in the online
mode.
Select the Configuration tab to switch the view from the monitor-state view to the
monitor-configuration view. Enter and edit the parameters on this tab.
After entry of the parameters, click
Send to load the parameters into the monitor (see
Input and modification of parameters requires the login of a user with a corresponding
authorization. Click User → Login and login with the following credentials:
User name:
Password:
Emerson recommends to crate an account for every user. For more details on the user
administration see
Plausibility check
Inconsistent settings are indicated below the tabs. As long as an error message is
indicated, the configuration cannot be loaded into the monitor. The error message
contains instructions to correct a faulty parameter input (see
Figure 5-23: Error message plausibility check
Information
Enter here the general data of the configuration.
MHM-97442, Rev. 2.06
in the symbol bar or Monitor → Configuration →
Admin
3637766
User
management.
Configuration data send and
Figure
5-23).
Configuration
February 2023
receive).
93
Advertisement
Table of Contents
