Operating Manual
MHM-97442
Note
Modifications of the data of user Admin or removing this user is not possible. It is only
possible to change the administrator password.
Configuration rights
Place a checkmark in the corresponding box to assign one or more of the following
authorizations for the configuration of monitors to the users.
•
Configuration send
The user has the authorization to load parameters to a monitor.
•
Edit basic settings
The user has the authorization to edit all parameters of tab Initial setup.
•
Edit sensor inputs
The user has the authorization to edit all parameters of tab Sensor input.
Edit analog outputs
•
The user has the authorization to edit all parameters of tab Analog output.
•
Edit digital outputs
The user has the authorization to edit all parameters of tab Digital output.
•
Edit test values
The user has the authorization to edit all parameters of tab Test values.
Edit communication parameters
•
The user may change baud rate and bus address of the monitor.
Command rights
Place a checkmark in the corresponding box to assign one or more of the following
authorizations regarding the carrying out of commands to the user.
•
Change monitor keyword
The user has the authorization to change the keyword stored in the monitor.
•
Enable test values
The user is authorized to activate the configured test values.
•
Reset cold start counter
The user is authorized to reset the internal cold start counter.
•
Reset latch
The user may reset latched alarm outputs.
•
Reset rotation
The user may reset the indicated rotational direction.
Reset speed peak
•
The user may reset the stored speed peak value.
Proof test
•
The user is authorized to carry out the proof test.
List of registered users
MHM-97442, Rev. 2.06
Configuration
February 2023
81