Table of Contents
Advertisement
Operating Manual
MHM-97442
Figure 5-47: Test
Test value 1
Enter here the two test values. Set, for example, Test value 1 to trip limit +15 rpm and
Test value 2 to trip limit -15 rpm.
Activate
Click Activate or Deactivate beside the input fields of the test values to activate or
deactivate the test value through the existing online connection. The LED beside the test
value indicates the activated test value with a yellow light.
CAUTION
An activated test value replaces the measuring value in the AMS 6300 SIS. To avoid an
unintentional trip during the ongoing operation, ensure that no more than one monitor
has an activated Test value ≥ Trip limit value at any time. Before continuing the test with
the next monitor, the test value of the currently tested monitor must be deactivated and
the trip message reset. If another monitor detects a disturbance or an overspeed is
detected during a test with Test value ≥ Trip limit value the machine trips.
Configuration data send and receive
MHM-97442, Rev. 2.06
and Test value 2
and Deactivate
Configuration
February 2023
119
Advertisement
Table of Contents
