Emerson Machinery Health AMS 6300 SIS Operating Manual page 84

Configuration
February 2023
command File → New or by connecting a monitor through an interface (USB, COM Port,
or RS 485). The monitor name consists of the product name and the serial number or the
name of the measurement (see
select the corresponding monitor from the project tree or from the graphical presentation
of the monitors. The monitor status view opens.
The name of the project tree can be changed. Right click on the project name to rename
the project. The project name can also be changed when saving the project (Save as...).
Figure 5-12: Project tree example
Delete a monitor from the project tree
Follow the steps to delete a monitor from the project tree.
Procedure
1. Right click on the monitor to open the pop-up menu with command Delete
84
monitor (see Figure 5-13).
Group Label). To edit the configuration of a monitor,
Operating Manual
MHM-97442
MHM-97442, Rev. 2.06